Viewing a thread - Gateway Problems with CUT Range Rules

You are logged in as a guest. ( logon | register )

Gateway Problems with CUT Range Rules Moderators: Novacek Jump to page : 1 Now viewing page 1 [25 messages per page]	View previous thread :: View next thread
Software -> Utility Applications	Message format

Posted 2010-07-29 4:37 PM (#21881)
Subject: Gateway Problems with CUT Range Rules

Regular

Posts: 55

Version: DAD 10.0c Gateway 10.0a

Problems setting up cut range rule. Seems to only scan rotate cuts. Range is 00001 to 99999 target 00001.

Logs yield no clues.

Posted 2010-07-30 10:01 AM (#21882 - in reply to #21881)
Subject: RE: Gateway Problems with CUT Range Rules

Member

Posts: 13

Location: Irving Tx

Version:9.1d

Have you checked your Database records, and that you aren't limiting it to a certain group?

Posted 2010-07-30 11:58 AM (#21884 - in reply to #21882)
Subject: RE: Gateway Problems with CUT Range Rules

Regular

Posts: 55

Version:

I am not sure what you are referring to specifically, but “Cut Range Mask” accessed from the “Cut Range Rule” screen is blank.

Jump to page : 1
Now viewing page 1 [25 messages per page]

(Delete all cookies set by this site)