ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ DAD users... README.6 3/17/96 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ This is information regarding the version 6.x release of the ENCO Systems DAD486x software. Note: These notes are intentionally vague. They are simply a list of changes made to DAD. Specific, detailed information on any of these items should be acquired from ENCO Tech Support. This new software contains many new features as well as numerous refinements to existing features. This document will highlight the various changes made. Please contact ENCO Tech Support (248-476-5711) for details (note Tech Support can no longer be reached via the 800 line). Refer to the README.5 file for information on all the refinements made within the version 5.x releases (latest was 5.9f). Refer to the README.GEN for other non rev-specific general installation notes and comments. See the EXISTING DAD VERSION 5 USERS INSTALLATION NOTES below for important updating instructions! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.3b (3/?/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The setup screen will now properly display the audio driver version TIMED events now use the HH:MM:SS format instead of seconds past midnite Corrected an error in playlist SCAN to properly handle ROTATE cuts ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.3a (3/12/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The PURGE button now properly handles DELETED cuts. i.e. once you delete a cut and then use PURGE, the cut (and its audio) are gone. Rebuild does not need to be run to 'get rid of the cut'. Rebuild will still 'pack' the database and we still highly recommend running it as often as possible just to keep the cuts database clean Note: many DAD.BAT files were delivered with the SHARE command added near the top. SHARE should no longer be used with DAD. Please remove this command from the DAD.BAT (or autoexec.bat or anywhere else) Version 6.2o and 6.2p changed the user setup files slightly. 6.3a changes them back to a format that's more downward compatible The startup information screen (welcome screen) has been eliminated. A more complete screen can displayed at any time within DAD by hitting function key F7 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2p (3/1/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Changed some internal time/date routines to better handle leap year especially when using kill and start dates Changed the video driver to be more efficient on Trident chip set based video cards ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2o (2/29/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The file: \dad\files\lib.hdr allows for changing the Library Title line (maximum 190 characters) ES-REM (DAD REMOTE or Text Mode DAD) now allows for security login by using ALT-L in one of the Playback machines ES-REM (DAD REMOTE) has been rewritten to handle problems exhibited by certain Pentium based workstations Corrected an error that would not allow logging in via the touch keyboard Added new DAD.CFG parameters: MASTERLOG_USERDEF = "any cuts.dbf field name" which allows the user to specify what the third field of the MLOG cut windows will contain i.e. MASTERLOG_USERDEF = "AGENCY" New DCL command: LOAD RECLIST reloads the current auto record list file TAMS problems related to changing styles corrected DCL command correction: SELECT MACHINE left/right MLOG Problems running on fast Pentium/PCI machines related to serial ports and mouse buttons corrected. added voice over tracking to the MasterLog Segue Editor Added PLEASE WAIT - message at DAD startup (after reindexing) to let the user know DAD is not quite ready yet... ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2n (1/25/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Eliminated the use of the METAPARM environment variable Added support of the script field to array and mini-array buttons when playing a command cut Added the display of the current Security user name to the SETUP screen Added the READ EMAIL button to the SETUP screen (only usable by DADSAT downlink sites) DADSAT downlink users now have an EMAIL available indicator when email arrives Corrected an error that would prevent Voice Over tracks created in the Segue Editor from playing in newly created or renamed playlists Setup screen now displays current security user name New DCL command: TIMESYNC local or server when local - gets time from server and sets local pc to that time when server - sets server time from the local pc time The TIME REMAINING field on playback machines now displays the length of time left in the current playlist (when backtime markers are not used) Control-C and Control-Break are now fully 'trapped' and handled Abort-Retry-Ignore disk errors (mostly from the use of a floppy drive with no diskette inserted) are now 'trapped' and handled ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2m (1/9/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Script machine now properly loads any \DAD\SCRIPTS\*.SML file Correction made to Masterlog RESTART button and sequencing When overwriting a deleted cut after a PURGE (new recording or ADDing a cut) the next REBUILD will not remove the cut from the library The waveform EDITOR now properly handles playing a cut that has the TAIL pointer on top of (or before) the HEAD pointer New DCL: REFRESH MLOG Refreshing MLOG and PBKS no longer clears the 'already played' status ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2l (1/4/96) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Note: The size of the DAD executable and supporting files update has exceeded 1.44 meg. For convenience, we have split the update into two files, DAD62L-1.EXE and DAD62L-2.EXE so that each may be placed on a floppy. Corrected editor waveform display scaling problem. array gray-out after play now works for command cuts array assign button getting disabled after play problem corrected record4 machine VUs bleeding thru in TAMS corrected masterlog 'makeup' button now completely functional masterlog: 'restart' (audio not available) stays in restart mode problem with touch keyboard not filling fields completely corrected additional TAMS problems corrected COPY CUT dcl will now always overwrite without asking the user COMMA_LENGTH = available via dad config file to adjust comma length duration (default == 100) asplay logging of a user selectable GPI status via new dcl command in GPI file - syntax: LOG GPI [] New DCLs for Masterlog machine: CHANGE MLOG RETURN MLOG MAKEUP MLOG New HOTKEYs for MasterLog machine: ALT-S: stop and restart ALT-T: take ALT-R: return ALT-U: up ALT-D: down ALT-H: change ALT-M: makeup Added the Playlist Modifier machine to the Pick Machines list in security so users can be prevented from loading the modifier machine REBUILD changes made to handle abandoned flag files (__*__.dbf) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2k (12/8/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The upgrade to 6.2k requires a new REBUILD, therefore the full DAD62k.exe upgrade program needs to be used (no MINI62k.exe). The new rebuild/DAD 6.2k handles cuts flagged for deletion and thosed completely purged. Note, that PURGE still does not remove the purged records from the library (rebuild needs to be run). This will change in version 6.3 The default IMPORT directory (\dad\import) will reset back to \dad\import each time the IMPORT button is used Made an internal change to the window manager to more effectively utilize memory for screens processing. Users changing machine layouts and moving in and out of LIBRARY and SETUP often should benefit from this change. Users of the ALT-L (goto library) and ALT-Z (goto setup) hotkeys, should benefit as well Added REINDEXING NOW - please wait - message at DAD startup Rotate cuts do not advance when played from a machine whose channel assignment is set to AUDITION .sml files now retrieved from \dad\scripts directory Corrected an error in the playlist modifier DELAY field when used in conjunction with the pop-up keyboard Masterlog machine now supports voice overs (new wedge of time displayed in the countdown circle as well). Added support for MLOG in the following DCL's: play, stop, next, select machine, load playlist, unload, up, down Touching the LOGO in the MASTERLOG screen will put the user into the SETUP screen The SETUP time field can now be opened so a user can change time right from the SETUP screen. The Date field is not turned on for this yet SEND TEXT DCL change: to send the real comma symbol "," use ^, (comma by itself is a .1 second pause) to send a drive letter, use the letter surrounded by brackets i.e. [G]\dad\import instead of G:\dad\import (this is because the colon ":" is a reserved DCL character used for daisy chaining dcl commands together) SEND COMMAND DCL change: to send a command that contains ticks ('), use \' i.e. SEND COMMAND ONAIR 'SEND TEXT A \'SERIAL STRING HERE\'' DISABLE/ENABLE GPI/GPO DCL change: user may append to end of command a delay time in seconds which will reverse the specified command after 'delay time' seconds i.e. ENABLE GPI 1 2 3 FOR 30 30 seconds later GPI 1 2 3 would be disabled Added DCL command: COPY CUT fromcut tocut ENTIRE/HEADTAIL i.e. COPY CUT 00011 01011 ENTIRE (copies entire cut 11 to cut 1011) COPY CUT 00011 01011 HEADTAIL (copies just head-tail of 11 to 1011) Corrected the processing of invalid GPO_GPI parameters in DAD.CFG files i.e. GPO_GPI = 8 16 24 when really intended to be 8 8 16 was looking for 16 GPI command lines. Unpredictable results would occur if all 16 lines weren't there. DAD now handles these invalid configurations Added functionality to the STOP dcl: STOP [fadeout duration] example: STOP PBK1 3 (fades out pbk1 over 3 seconds) this fade out used to work only for PBK machines. it can now be used for QUAD machines. (eg: stop quad3 4) This also means that CUTS with fade cues will fade out when played in a QUAD machine slot LIBRARY/MAINT/GEN REPORTS/LIBRARY LISTING will now use the currently selected/sorted/grouped library listing for the report and display the selection criterion in the report removed all references to semaphore support - replaced by direct IPX communications (SEND COMMAND (dad dcl) and DADSEND (dos command)) Eliminated two DAD.CFG parameters: STOP_PLAY_SEMAPHORE AUTORECOVER_PLAY Added new DAD.CFG parameters: RECOVER_COMMAND_CUT cut# if DAD exits normally - upon startup DAD will autoexecute the command cut specified by STARTUP_COMMAND_CUT. if DAD had not exited normally (power failure, crash, etc), then upon startup it will execute the command cut specified by RECOVER_COMMAND_CUT. this can be very useful to have specific playback machines startup after a power failure. EDITOR_PEAK n n is a positive value in dB, that indicates the vertical scaling of the waveform editor - default is 6 dB - min is 0, max is 16 The waveform editor will now display any "clips" by making the clipped portion of the waveform RED. The VU meters were changed slightly. The overload LED's (rightmost part of the display) used to lite up at anything > 15dB, they now display YELLOW at anything > 10dB and will turn RED (and stay RED) at anything > 16dB (digital clip) The REBOOT dcl when run from a PBK machine will increment the playlist before exiting DAD so the REBOOT command won't stay in the playback slot LIB/MODIFY/COPY now displays a message when an ARCHIVE is about to occur (as opposed to a real COPY). An ARCHIVE is done by making the destination drive letter different from the source drive. A COPY is done by leaving the source and destination drives the same. A COPY truly makes a copy of the cut (including adding an entry to the CUTS library database), while an ARCHIVE makes no entry in the library (only copies the audio). You can now ESCAPE out of the following screens (with the ESCAPE key) LIB\MODIFY\COPY and the COMMAND CUT EDITOR. The Command Cut Editor now also supports 'embedded colons'. I.E. position pbk1 '10:00:00' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2j (11/29/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ rewrote the CMOSSYNC command to more generically handle CMOS (hardware) clocks. default for the CMOSSYNC timer is now 60 minutes and we recommend not setting it to less than 60. moved the INPUT and OUTPUT attenuator default settings to the CONFIGURE AUDIO button in SETUP added the display of TIME, DATE and Day of Week in SETUP DAD will not allow the use of an invalid COM port, regardless of DAD.CFG settings. the DCL load playlist now support the new MASTERLOG machine: i.e. load playlist mlog playlistname new DAD.CFG parameter: MASTERLOG_REPLAY = ON/OFF allow users to decide to allow the replaying of played cuts (note played cuts turn grey) rotate cut counters now check for pointing beyond the end of a rotate playlist and reset to 0 if so changed the handling of missing security key options (switcher_io in particular) the REC button on the RECORD machine will no longer attempt to go into monitor mode when the audio board is a playback only board (sx7, sx9) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2i (11/26/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ new DAD.CFG parameter: CMOSSYNC = or where n is in minutes. default is now 60 minutes. every n minutes DAD will update the DOS clock from the CMOS hardware clock on the motherboard. this should do much to make the DAD clock more accurate made some changes to the position command to handle different time formats better (hh:mm:ss and decimal seconds from midnite) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2h (11/21/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Note: \DAD\FILES\*.CFG files which have the following line may not run correctly in version 6.2h: GPO_GPI = 8 16 24 If you experience difficulty please change the line to: GPO_GPI = 8 8 16 (NOTE: This need for this has been eliminated in 6.2k) added initial support for the 2nd generation ONAIR control screen called MASTERLOG. Accessible from the normal Pick Machine ICONS screen the EXECUTE DCL now supports switcher field data cuts with "DELETE" in the killdate field will not generate an overwrite warnings. NOTE: rev 6.3 is scheduled to contain new database code to suppress the display of PURGED records in the Library, Playlists, and Array buttons. new DCL commands: (mostly for DADSAT use) DISPLAY EMAIL VALIDATE '' INJECT PLAYLIST EXTRACT PLAYLIST EXTRACT PLAYLISTS PLAYWHILERECORD new DAD.CFG paramater RECORD_UPDATE_METHOD = 1 or 2 where 1 = flush, 2 = close/reopen this controls how DAD handles the CUTS database after a recording finishes. This is a rather low level optimization parameter. If interested in the details - call ENCO Tech Support. Default is 2 and the need for it will disappear in version 6.3 PLAYLIST SCAN now supports secondary level playlists (i.e. rotate cut and rotate event based lists). You may also enter a DATE on which to base the scan to check for inactive/expired cuts. changed a few low level audio calls (internal changes and effects) to prepare for support of Linear format files over networks added the field LINE_ID to playlists for internal use in processing export routines for reconciliation the TIME field in full screen PLAYLIST MODIFY now allows for changing the times of playlist events corrected a security system error that resulted in security user names longer than 7 characters causing a problem during DAD startup. Masterlog screen and buttons also added to SECURE the POSITION field in the EDITOR can be 'loaded' with a time to position the waveform for quicker access to a specific time within a long cut additional changes mades to TAMS ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2g (unreleased - all included in 6.2h) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD startup now looks for the \dad\files\__reb__.dbf file used by the REBUILD command to help insure CUTS database exclusivity during rebuild changed PLAYLIST MODIFY MERGE to handle both forms of the TIME FIELD, HH:MM:SS and seconds from midnight changed the POSITION DCL to support offsets to times using the following types of codes: (note use of +, CC and XX in the time digits) POSITION PBK1 12:34:56 positions pbk1 list to at/before 12:34:56 POSITION PBK1 CC:00:00 positions pbk1 list to at/before current hour POSITION PBK1 CC:23:10 positions pbk1 list to at/before current hour and 23 min and 10 seconds POSITION PBK1 CC:CC:CC positions pbk1 list to at/before current time POSITION PBK1 +01:00:00 positions pbk1 list to at/before current hour plus 1 hour (...goto top of next hour) POSITION PBK1 CC:+10:XX positions pbk1 list to at/before current hour plus 10 minutes and don't care about secs ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2f (10/16/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Made changes to the database driver to better handle multi-user indexing Added DCL command: RESET COLOR machine (where machine is minar1, minar2, or array) i.e. RESET COLOR minar1 For users of the GRAYOUT AFTER PLAY option this DCL will return the button colors to normal without having reload the user setup Changed REBUILD and DAD to handle exclusivity on a network Removed the data base PACKING function from the LIB/PURGE button. Proper packing of the cuts database must be done with REBUILD (outside of DAD) and in a UNIQUE manner (i.e. one pc must be started up by itself to properly run rebuild which in turn properly runs the packing utility). The old way of running the PACK inside the PURGE button on a network could lead to inconsistancies in the CUTS index files Added the TIME field to fullscreen PLAYLIST MODIFY so entries can be modified and viewed The EXCEPTION LISTING in LIB/GEN REPORTS now properly handles LOCATION fields that are entered lower case Multiple SHIFT-F4 (status screen) no longer result in graphics display problems Approximately 16 pop-up windows have been modified to allow the ESCAPE key to do what touching the CANCEL button does Corrected an error in the LIB/CUT SECURITY pop-up that would prevent getting into cut security system more than just a few times ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2e (10/5/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Internally added Branch events will use the HH:MM:SS format instead of seconds since midnite. Changed the Segue Editor/Voice Over Tracker to properly handle user setup files that don't have RECORD 4 parameters (especially drive letter) configured correctly. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2d (10/4/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ LOG_BRANCH events now properly display the source PBK machine. They all used to log as PBK1 only. Note: this change is cosmetic in nature. This is not a mandatory update. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2c (10/2/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Made an internal change to the cuts database FLUSH routine. Implemented new cut number modify, copy & move procedures in LIB/MODIFY and eliminated LIB/MAINT/COPY-MOVE. To renumber a cut, simply change the cut number in LIB/MODIFY. To copy a cut use LIB/MODIFY/COPY. To move a cut, simply change the location field in LIB/MODIFY. Eliminated the AUDIO parameter in DAD.CFG Changed the handling of database closings when exiting DAD Non-audio events (branches, delays, etc.) can display an outcue in the PLAYBACK SLOT of a Playback Machine by using the Comment field of that element in a playlist (mostly used by Importers). ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2b (9/27/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ New DCL: SEND COMMAND <'dcl string'> i.e. SEND COMMAND ONAIR 'play pbk1' For network workstations only, this replaces the old SIGNAL commands that allows one workstation to "tell" another to do something (via free form DCL commands). A new DOS command "DADSEND" can be used at the DOS command prompt by any workstation on the network to tell a DAD workstation what to do. This command can be found in \dad\progs. Turned off the ability to renumber cuts in LIB/MODIFY. This may be linked to some users reports of "missing" cuts and/or data moving from one cut to another. Corrected an error that would prevent users from logging into DAD when the previous DAD session resulted in an error (like missing CFG files, security keys problems, etc.). Changed EDIT/LOAD-SWAP/SEARCH logic that could result in erroneous playlist refresh confirmation pop-ups. Corrected an error in SINGLE USER SETUP ACCESS (in security) that could result in not being able to restart a session after a power failure, network failure or abnormal termination. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.2a (9/21/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Reversed the order of this README file to be reverse chronological Changed window manager to better handle pop-up memory allocation should result in more stability for Changed the BRANCH and GPOGPI logging facility to use %location% name and a unique number so logs files aren't overwritten and multiple workstations can log simultaneously. Log file names now are of the form: \dad\logs\onair.G00 (G for GPOGPI) \dad\logs\prod.B15 (B for BRANCH) When the numbers "roll" over to 99, they stay at 00 till files are deleted Corrected an error that could result in missed Branch events ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1g (unreleased) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Added icons to the editor main waveform display to indicate all pointer positions. For example, when setting FADE points, you'll be able to see exactly where the real HEAD and TAIL points are Moved the Enable/Disable CUT SECURITY control from the DAD.CFG file to the SECURE program Added protection of the SETUP/README button to the SECURE program Corrected the Fuel Guage display to support multiple network volumes Corrected an error in RECALL User Setup that could leave DAD in an unpredictable mode Changed the CAPTURE utility for Alternate Input to support multiple playbacks ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1f (unreleased) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Completed support of multiple SEC points per cut. Using a new audio driver (to be announced), the editor scrubbers have been completely revamped to feel and sound more natural. Note you must get and use the new audio driver for this to work. The DAD.BAT will require changing. The SET AUDIO line must be changed. will look something like: set audio=sx25-33p ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1e (8/31/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ New DCL: SET P_PLAY x 'text' cut_num i.e. SET P_PLAY 5 'NEWS' 01201 Assigns cut_num and 'text' to p_play button x. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1d (8/30/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ New DAD.CFG directives: LOG_BRANCH = ON LOG_GPOGPI = ON Log_branch will write to \dad\logs\branch.log all hard/soft branch and related events with date/time stamps. Log_gpogpi will write to \dad\logs\gpogpi.log all gpo and gpi related events with date/time stamps. Notes: 1) only one user on a network at a time should use these 2) every time DAD starts these logs are cleared if you want them saved - rename or copy them Added the Shift-F7 memory checking screen. Tech support personnel may ask a user to use this screen during troubleshooting sessions. Installed initial support for Sound Blaster 16 audio boards. Installed initial support for multiple SEC points per cut. These are settable via the editor SEC/TER mode. Made correction to PINYIN to handle a few missing pinyin words. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1c (8/28/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected playlist text height problem to support Chinese characters Corrected sending a "NULL" character - using ^@ Turned off DAD.SEM processing for network users. Added a query for deletion to TAMS delete button Corrected duplicate TAMS line items in tams slist Changed mouse limits after running Remote Made a change to ensure that cuts database current record is repostitioned after doing command cuts ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1b (8/23/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected timed record list error. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.1a (8/17/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Added the DAD.CFG parameter PINYIN for Chinese support. example: PINYIN = ON Note this requires special font files in the \dad\fonts directory. Added the DCL command PHONE_IO ENTER which along with a custom \dad\files\xform.dcl file turns DAD into a hi-fi voice mail system. Initially developed for interfacing to the Telos Zephyr System. Slight change made to cut/paste in the editor that resulted in a visual "gap" in the waveform after cuts/pastes. Send_Text now supports sending a "NULL" character - use ^@ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0l (7/21/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected an error in processing re-entrant DCL commands. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0k (7/20/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ New DAD.CFG option: STARTUP_COMMAND_CUT = xxxxx where xxxxx is the word NONE or a valid DAD cut number example: STARTUP_COMMAND_CUT = 12345 if cut 12345 is a command cut (DCL), it will execute when DAD starts up (like an AUTOEXEC cut) Changed fades (in, out and cross) to be logarithmic instead of linear Corrections made to the 4Play machine (pacer bar, countdown timers, etc) Moved the securing of the CUT SECURITY button from SETUP SCREEN to LIBRARY in the SECURE program. You can now ESCAPE out of the new README files in SETUP The SHIFT-F4 audio and GPI/GPO device status screen can be used without having a debug variable set. You can also now ESCAPE out of this screen. Another correction made to the fuel guage. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0j (7/11/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Changed DCL processing to support over 200 characters in quoted strings. Added support for the new 16in/16out GPI board Changes made to COPY/MOVE to better support overwriting existing cuts ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0i (7/5/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Slight modification made to TIME_SYNC processing to reset the "base" time, after the time is reset rather than just before the reset. Change made to the POSITION DCL to allow for two time formats: seconds past midnight and hh:mm:ss Format of this DCL is now" position 'hh:mm:ss' example: position pbk1 '23:58:45' ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0h (6/27/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected SEGUEing between ROTATE CUTS and audio cuts with a transition duration of zero. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0g (6/26/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected a problem with an audio device not "releasing" itself when completing an audio task, when the Machine was processing in the background (not displayed). This would result in SEGUEs turning into AUTOPLAYs. Added a STATUS SCREEN to view the live status of all audio devices, GPInputs and GPOutputs. With the DEBUG variable set to any valid file name (i.e. set debug=onair.dbg), using SHIFT-F4 will display this new STATUS SCREEN. Corrected audio "INUSE" indicators in pick machine mode. Added a new button in SETUP for reading this README file. This button will be enhanced later to allow showing other critical files (.cfg .gpi .gpo .is1 .os1, etc). UP and DOWN buttons for scrollable lists can now be "held down" for repeated ups and downs. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0f (6/23/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Added new DAD.CFG parameter TIMESYNC = mm LOCAL/SERVER i.e. TIMESYNC = 60 LOCAL this will synchronize the local workstation from the server time every 60 minutes Turned cut security back on in the LIBRARY ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0e (6/20/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected error in processing SEND TEXT x 'strings' Added CANCEL button in Channel Assignments DAD now handles colons ":" inside quoted strings Restore Presets in Record Parameters screen refreshes screen properly ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0d (6/16/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ The ALT-Z SETUP access key sequence is now SECURity protected with the SETUP button itself. The ALT-C touch calibration key sequence is now SECURity protected with the Calibrate Touch Screen button itself. Added new type of Playlist element - the Execute Element - type "E". Simply executes the contents of the comment field as a DCL. Very handy for issuing DCL's without having first to create a COMMAND cut. In serial I/O and send text, the use of a comma "," will result in a .1 second delay (used to be .2 seconds) Cut Security button has been removed from the SETUP screen in anticipation of its move to the text mode SECURE program. LOAD CUT now maintains Sequential Series cut number ordering SELECT MACHINE LEFT/RIGHT PKBx from minar1/2 button bleeding fixed UNLOAD for 4play now working correctly. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0c (6/15/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Sounds Like SEARCH changes made. EXIT TO DOS verify window correction made. START TALK Timer displays as a vertical yellow line in the Segue Editor. The initial window size of the segue editor is now 30 seconds. The ALT-X exit sequence is now security protected with the EXIT TO DOS button in SETUP. Antex SX33 is now officially supported (note requires the use of the Z1 audio driver and can not be mixed with the other SX25-32 driven boards). Another change made to Fuel Guage to support extremely large drives with large block sizes. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0b (6/14/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Corrected an error in the editor that would move the tail pointer to appx 2 minutes on cuts longer than 2 minutes. Made some changes to the SEARCH facility in Library and pop-ups to make it operate more intuitively. Also added the SOUNDS LIKE search button for use when the user isn't sure about correct spelling of the search strings. ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0a (6/09/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Official release of version 6.0 The DAD.CFG parameter for drives now will ignore the use of colons. for example: DRIVES = "F: G:" will be interpretted (and re-rewritten) as DRIVES = "F G" In serial I/O and send text, the use of a comma "," will result in a .2 second delay When SEARCHING in LIB and library pop-ups, the search text is displayed and you can now abort the search process ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DAD 6.0á BETA release only (5/01/95) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Added configurable BACKTIMER display to playback machines Uses new Backtime Marker element in playlist (addable via IMPORT only) Added preliminary support for feeding QUAD PLAY machines from a playback machine (first manual phase of the DAD 4PLAY MACHINE) (includes a device for each of the 4 players as well). Added addressability to DCL to allow for head ends to remotely control downlink sites on a site specific basis. Also created new DADSAT program for head ends Added link to MusicMaster (A-Ware) for user transparent interface to music scheduling (automatic importing/refreshing rule analysis). Uses the new: STOP_PLAY_SEMAPHORE = "name" directive in DAD.CFG which increments the named semaphore after each playback "stop" event. Added the asplay logging of command cuts that play in array, mini-array p-plays and library/play (as long as channel assignment is in PROGRAM mode) Added the capability to turn on/off asplay logging of playback machine cuts via the channel assignment PROGRAM/AUDITION modes (like array, mini-arrays, p-plays) Corrected record machine #4 length bleed thru after insta trim when not on screen Added indicator of audio "INUSE" in pick machine mode Corrected the editor remnants afer swap-load especially from record/edit Revamped renumber cutid routines. Behaves much better now and will not stop audio on other workstations during a renumber cutid VO segues play correctly now Record Monitor switch now available in record parameter setup screen Added a Set Segue Start button in the VO editor Changed handling of data in Record Machine fields for existing cuts Buttons can now have multi-line labels New DCL commands: download asciifile set record threshold audio status ;returns status of the audio device of that machine position 'hh:mm:ss' ;if machine is playing, this positions the playback machine "list" ;to the first entry in the playlist that has the specified time. ;if the machine is not playing then it positions the list and ;loads the playback slot with the first entry in the playlist ;that has the specified time reboot ;closes all files and shuts DAD down gracefully, then reboots renumber [] ; renumbers DAD cut alert 'message' ; "message" pops up in a windows and remains on screen until ; user hits or presses OK button Changed DCL commands: WAIT n.d ; now accepts decimal numbers and does background processing STOP PBKx secs ; now supports secs (seconds) to fade out over PLAY PBKx ; playback machines will "sense" for invalid use of ; this PLAY command and prevent it from infinitely looping LOAD SETUP name ; properly handles background color SYSTEM 'command' ; returns the user to \DAD directory when re-entering DAD Created new RE-PLIST.EXE utility to refresh the list of playlists that DAD sees. Can be found in \dad\progs. DOS command SIGNAL added. Can be found in \dad\progs. Used to SIGNAL any DAD workstation to issue any DCL command. Setup via the \dad\files\dad.sem file. Corrected ENABLE GPi/o x y z DCL when multiple parameters are used Script now supports audio buttons within the text via the new ENCO Script-Markup-Language (SML). - added keyboard control for new script machine - script machine dragbox LOAD problem corrected - buttons with no title specified will default to the LIBARY title Corrected Security System error when copying users. Security report printable per user Deleteing a cut now correctly deletes any corresponding .txt files Added touch/mouse screen keyboard for workstations that don't want a keyboard at all. corrected problems with DCL: SELECT MACHINE correct "half touch" drag window problem adding "logging" capability for GPI/GPO and BRANCH events will utilize the new subdirectory \dad\logs reorganized supporting file placements and added the new subdirectory \dad\modules which now contains the *.pcx and *.bin files. cmds.txt, *.rpg and *.dat files have been moved to \dad\files corrected error with using invalid MPEG bit rates (after reducing sample rate for example). removed the OVERWRITE pop-up when using the NEXT REC1 dcl command if the cut that gets loaded already exists. Corrected the FUEL GAUGE (thermometer) for networks! When disk gets over 98% full - recording stops (nicely). new dad.cfg parameter SINGLE_USER_SETUP_ACCESS = ON/OFF now active if set to ON, will only allow a security user to utilize his "security named" user setup file, also automatically uses this setup file at login time lib/maint/copy-move problem with location corrected disabled control-C key sequence (not to be confuse with the still active ALT-C touch calibration sequence) ES-REM (DAD Remote option) changes: ; Library Modify now available ; Remote Recording now available ; Auto/Manual now available for Playbacks Rewrite audio problems corrected (including MPEG 44.1) SLIST_TEXT_HEIGHT parameter from DAD.CFG now effects all scrollable lists ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ EXISTING DAD VERSION 5 USERS INSTALLATION NOTES! ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Simply issue the "DAD62x -o" command in your \DAD subdirectory. You may be prompted for a password. Enter it as instructed by ENCO. If you forget the -o (overwrite) option, you will be prompted for writing over existing files. Type in capital A at the prompt and all files will be overwritten properly. First time 5 to 6 upgraders need to do the following (NOT OPTIONAL!): Simply issue the following commands EXACTLY as listed... cd\dad copy *.rpg \dad\files copy *.rec \dad\files copy *.txt \dad\files copy *.dat \dad\files From time to time the DAD utilities for database rebuilding, security, etc. change. These changes are now built into the self extracting update file (the DAD61f.exe file for example). To access some of the new 6.2 features, new DAD.CFG parameters have been added. To get a new DAD.CFG file (network users will use %location%.cfg like ONAIR.CFG, etc. ), simply run DAD, then do SETUP/MISC DEFAULTS/ACCEPT. This will generate a new CFG file with all new parameters available for your use. (These CFG files are in \dad\files). When you are satisfied that you will run version 6.2 and not return back to version 5.9... some clean up will help keep your directories organized. We suggest doing the following sometime after updating to version 6.2: simply issue the following commands exactly as listed... cd\dad del *.pcx del *.bin del *.rpg del *.txt del *.dat The DAD subdirectory should be nice and clean now containing only: DAD486x.exe, dad.bat, secure.bat, metwnd*.drp, and supporting subdirectories. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ EXISTING DAD VERSION 4 USERS NOTE! ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Version 4 users - contact ENCO Tech Support for assistance in upgrading to version 6 or later. You will need special upgrade programs! ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ENCO Systems, Inc. tel:248-476-5711 ³ ³ 24555 Hallwood Court fax:248-476-5712 ³ ³ Farmington Hills, Michigan bbs:248-476-5713 ³ ³ 48335-1667 USA isdn bbs:248-478-2967 ³ ³ ³ ³ web: http://www.enco.com ³ ³ ftp: ftp://ftp.enco.com ³ ³ email: support@enco.com ³ ³ ³ ³ For after hours tech support, call 248-476-5711 and request that a ³ ³ tech support engineer be paged. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ