旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � DAD users... README.GEN 12/08/95 � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � EXISTING DAD VERSION 5 USERS INSTALLATION NOTES! � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 Simply issue the "DAD62x -o" command in your \DAD subdirectory. You may be prompted for a password. Enter it as instructed by ENCO. If you forget the -o (overwrite) option, you will be prompted for writing over existing files. Type in capital A at the prompt and all files will be overwritten properly. From time to time the DAD utilities for database rebuilding, security, etc. change. These changes are now built into the self extracting update file (the DAD62k.exe file for example). 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � EXISTING DAD VERSION 4 USERS NOTE! � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 Version 4 users - contact ENCO Tech Support for assistance in upgrading to version 6 or later. You will need special upgrade programs! 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 DAD.BAT file notes 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Those users choosing or needing to upgrade audio drivers: Edit your \DAD\DAD.BAT startup file as follows: reset the "audio" environment variable near the top of this file i.e.: @set audio=sx25-32v Network users note: be sure to have uniquie LOCATION variables set for each workstation. Note that capital letters and spacing around the "=" sign is important! i.e.: @set location=ONAIR - or - @set location=DAD1 DAD no longer uses the following environment variables: DADCFG TOUCH DADRES METAPATH NETWORK EDITFILE References to these variables may be removed from your DAD.BAT file. i.e. the line: @set DADCFG=\DAD\FILES\DAD.CFG may be deleted The touch screen calibration file for standalone workstations used to be \dad\files\touch.cal. It is now \dad\files\dad.cal and the UPDATE5 program renames it that way. The REINIT section of your DAD.BAT file may still refer to TOUCH.CAL. Change the word TOUCH to DAD so the line reads: @copy \dad\files\touchcal.sav \dad\files\dad.cal >nul Network users line should read: @copy \dad\files\touchcal.sav \dad\files\%location%.cal >nul 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 SPECIAL CONSIDERATIONS 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 DAD requires the use of a "REAL" Microsoft Mouse Driver regardless of the type of mouse, trackball or touch screen being used. Version 9.01 of the Microsoft Mouse Driver ENCO prefers is on our BBS in the FILES area and called Mouse.exe or Mouse.zip. Serious problems will occur if you do not use this driver! If you have a pointing device that will not support this driver you will need to change your hardware to one that does. PC's shipped by ENCO came with Real Microsoft Mice so nothing need be done for those systems. 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴 Some "words" are DOS reserved words and should not be used for playlist, user security and user setups files and names. Do not use these "words": COM1, COM2, COM3, COM4, CON, AUX LPT1, LPT2, LPT3, PRN, NUL Also limit the use of "special" characters like: . .. | \ , : etc... 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � ENCO Systems, Inc. tel:248-476-5711 � � 24555 Hallwood Court fax:248-476-5712 � � Farmington Hills, Michigan bbs:248-476-5713 � � 48335-1667 USA isdn bbs:248-478-2967 � � � � web: http://www.enco.com � � ftp: ftp://ftp.enco.com � � email: support@enco.com � � � � For after hours tech support, call 248-476-5711 and request that a � � tech support engineer be paged. � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸